Page 8

Da Canoe
Page--1--2--3-- 4--5--6--7--8--9--10--11--12--13--14
Latest pics
latest project

I  layed the fiberglass on the boat (pic 1) and with my hand brushed it flat on the hull.In picture 2 you can see that Ive put down the epoxy over the fiberglass on half of the canoe this part of the process had to be one of the best so far .Well after getting the canoe all done (see pic 3) i found that the fiberglass had bubbled up on a few spots ...i hope i can fix this if not i think it will be ok .tears i tell ya ...tears  LOL =) oh yeah if you came straight to this page go back to page 7 and take a look at the pic i made that will give you an idea of how the boat will look right side up =)

I put the final coat of epoxy today...yes ive been lazy on the shaving situation LOL got thr goatee thing goin =) The things to the side of the canoe are the craddles ...when i take the canoe out of the mold it will lay in the craddle so that i can get the inside sanded and glassed =)

I took the canoe out of its molds and placed it in the craddles.The shavings in the bottom right picture shows how much ive planed off on the inside .If you look cloce you can see where the glue marks are from the molds.Ive got lots of work to do before i can glass the inside =)